MXR® BASS OCTAVE DELUXE
M288
The Bass Octave Deluxe offers two independent analog sub-octave voices with a Dry control and a Mid+ switch to optimize the sound of your parallel clean signal.
This pedal can be powered by a 9-volt battery, a Dunlop ECB003 9-volt adapter, or the DC Brick™, Iso-Brick™, and Mini Iso-Brick™ power supplies (not included).
- Two independent sub-octave voices
- MID+ switch adds mid range boost
- Constant Headroom Technology™ for exceptional headroom and tracking
- Organic analog tone
- True bypass
THE LONG STORY.
The Bass Octave Deluxe is a dual-voice octave pedal that offers analog tone, true bypass, and a variety of tonal options. MXR's 18 volt Constant Headroom Technology™ provides high headroom and superior tracking. Use the Dry knob to mix in your direct signal, and hit the Mid+ switch to add up to +14dB of internally adjustable mid frequencies (400Hz or 850Hz). Finally, mix in two separately controlled octave voices-Growl (for throaty tone) and Girth (for deep tone).
CONTROLS
- MID+ switch adds up to +14dB of internally adjustable midrange (blue LED indicates on)
- DRY knob controls volume of clean bass signal
- GROWL knob controls volume of throaty, midrange sub-octave voice
- GIRTH knob controls volume of deep and smooth sub-octave voice
- FOOTSWITCH toggles effect on/ bypass (blue LED indicates on)
DIRECTIONS
- Run a cable from your guitar to the Bass Octave Deluxe’s INPUT jack and run another cable from the Bass Octave Deluxe’s OUTPUT jack to your amplifier.
- Start with all controls at 12 o’clock.
- Turn the effect on by depressing the footswitch.
- Rotate DRY knob clockwise to increase level of dry signal or counterclockwise to decrease it.
- Rotate the GROWL knob clockwise to increase level of throaty midrange sub-octave voice or counterclockwise to decrease it.
- Rotate the GIRTH knob clockwise to increase level of smooth, deep sub-octave voice or counterclockwise to decrease it.
- Depress MID+ switch to boost midrange. Frequency and level are both adjustable via internal slider (up for 850Hz, down for 400Hz) and trim pot (+4dB when fully clockwise, +14dB fully counterclockwise). Please see diagram
SPECIFICATIONS
- Input Impedance: 1 MΩ
- Output Impedance: < 600 Ω
- Noise Floor*: 85 dB
- Octave Bandpass: -3 dB, 8 Hz to 46 Hz
- Control Range
- Dry -∞ to +2.5 dB
- Girth -∞ to +1 dB
- Growl -∞ to +6 dB
- MID+ Switch**
- Gain: +4 dB to +14 dB
- Frequency: 400 Hz or 850 Hz
- Bypass: True Hardwire
- Current Draw: 14 mA
- Power Supply: 9 volts DC