MXR® FLANGER

M117R

• Create wild sounds from jet plane takeoffs, vibrato, cool space effects and short delay
• A staple of ’70s rock and funk
• Adapter 18V included: Yes

THE LONG STORY

The MXR Flanger creates a variety of wild sounds from dynamic jet plane or cool space effects to short delay, chorus and vibrato. Back off Width to zero to disengage auto-sweep, then use the Manual knob to physically place the effect anywhere along the frequency spectrum; use with guitar, bass, keyboards or vocals.

CONTROLS

1. MANUAL knob controls the degree of phase shifting 
2. WIDTH knob controls the intensity of the time delay set by SPEED knob
3. SPEED knob controls the speed of time delay
4. REGEN. knob controls the intensity of the overall effect
5. FOOTSWITCH toggles effect on/bypass (blue LED indicates on)

DIRECTIONS

• Run a cable from your guitar to the Flanger’s INPUT jack and run another cable from the Flanger’s OUTPUT jack to your amplifier.
• Start with all controls at 12 o’clock.
• Turn the effect on by depressing the footswitch.
• Rotate the MANUAL control clockwise to emphasize higher frequencies or counterclockwise to emphasize lower frequencies.
• Rotate the WIDTH control clockwise to increase the intensity of the time delay as set by the SPEED control or counterclockwise to decrease it.
• Rotate the SPEED knob clockwise for a faster phase effect or counterclockwise for a slower phase effect.
• Rotate the REGEN. control clockwise to increase the overall intensity of the effect or counterclockwise to decrease it.

SPECIFICATIONS

• Input Impedance     470 kΩ
• Output Impedance     1 kΩ
• Max Input Level 5 dBV
• Max Output Level     5 dBV
• Noise Floor*     -98 dBV
• Noise Reduction     2:1 ratio
• Max Delay 12.8 ms
• Rate Range 0.1 Hz to 10 Hz
• Current Draw 39 mA
• Power Supply 18 volts DC